Water Softener Installation and Maintenance

best water softeners Types

Definitely the most popular and commonly used kind of a whole-house water purifier is an ion-exchange or even”cation exchange” unit, but a few Of other technologies will also be available. The following will explain the differences.

Salt-Based Ion-exchange Softener

Such a water Heater bicycles water throughout Two tanks: one with individual resin diamonds and the other full of brine. It works on the principle of ion exchange, softening hard water from substituting sodium (salt) for hard minerals such as calcium, magnesium, and iron. For a complete explanation of how a traditional water softener works

Salt-Free Water Softener

A salt-free water softener regenerates using a Potassium-chloride salt substitute instead of sodium. This type of unit may be a better option for people who’re worried about salt intake. This type of water purifier is a de-scaler –it will not lessen the hard water but instead prevents minerals from being deposited as the scale into the surfaces of water-using pipes and appliances.

The consensus is that this type of water therapy Is much better than no water softener at all; however, not as active as traditional water softening.

Dual-Tank Water Softener

When a water purifier is recharging, It’s supposed to Disconnect out of the water system, so it is actually out of pocket. For this

The rationale, the regeneration cycle is typically set that occurs at night. If softened water becomes necessary through the regeneration cycle, this can be problematic.

If the downtime of the water softener is a Problem, or if a family is large or lifetimes where water is especially hard, it can be smart to think about a dual-tank water softening unit using two resin tanks. Having a dual-tank group, even when one container is used, the alternative is regenerating.

As a result, softened water is being supplied continuously, With no break in service. And because those components operate on demand, they may be sized smaller than single-tank units.

Several models can be found. One favorite Solution, the Fleck 9000, features a fully adjustable valve that’s controlled by a meter. When the water softener starts backwashing one tank, then its control switches the water supply to the additional tank, so offering a continuous flow rate of 21 gallons per minute. With this version, you should find various tank capabilities –24,000-, 32,000-, 40,000-, 48,000-, 64,000-, 80,000-, along with 110,000-grain capacity each tank.

Dual-Tank Considerations

When Looking for a more dual-tank water purifier, keep in mind the space it’ll require. Set it up where it can serve the main inbound water line so it can supply the entire home. Additionally, it will call for a drain for backwashing. If you Pick a model That Needs electric energy, then

Be sure a circuit is located nearby. For more about setting Your water softener, see How to set up a Water Softener. Also, look for characteristics such as NSF (National Sanitation Foundation) certification and also a Good guarantee on the controller valve and mineral.

Tanks for example 36 months for its valve and ten years to get the Mineral tank. A fantastic water softener should continue 20 or more years.